Mazda - car, loving care and comfortable service. This directly applies to the painting. And who, if not favorite car owner will be able to do it at the highest level? Of course, do not forget about the general rules and some schemes, preferably during the painting of the car at home to avoid further confusion and make beautiful mazda into a monster. First: Before you start any action on the painting, you need to wash the car, and once again to clarify - it really necessary to paint or you can leave everything as is. Washing, of course, is their own hands and simultaneously check pillar, bottom and other details on the need for repair. If any item requires intervention or change, then the painting should be postponed. Second. Necessary to prepare the body. Using screwdrivers, pliers and other essential tools necessary to untwist and remove all the body parts (locks, gaskets, moldings and other) that should not be painted. After this time-consuming occupation's turn to clean the body from corrosion. If, however, found a hole from rust - then there will only welding. Next, the third stage - a primer. It is a corrosion-resistant coating and is divided into three stages. The first phase - phosphate metal. The second stage - the primer used for alignment, thereby smoothing the microscopic defects and the surface prepared for varnishing. The third stage - gives presentation covering. Now the surface is ready to spray enamel. And thus - the fourth step of directly applying the enamel. Should pay attention to the options for paints: - simple, single layer - double layer - Metallic and pearl, which will look at this sleek and modern cars, such as mazda, very succinctly. For painting at home is better to use acrylic based paint, since it does not require high temperatures during drying. And this is important because, for quality painting requires three layers of paint that should not be dry for a long time. And last, the fifth stage - finishing. After the surface has dried, it needs polishing. After polishing acrylic lacquer is applied and the surface is dried again. Following this, at first glance is not complicated, but actually quite tedious and requires more time steps, you can upgrade mazda and a positive result for a long time to be proud of the results of their labor, because manual work is always a special price.
